Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.
Make your Glendale, AZ, garage feel cleaner, brighter, and more practical with a durable flooring system designed to cover worn concrete, handle daily use, and improve the overall look of the space.
Call (602) 820-7739Bare concrete in a Glendale garage stains, dusts and cracks, and it does all three faster once the slab has a few decades on it.
The garage is the most heavily used room in most Glendale houses and the only one still finished in raw concrete. It parks the cars, stores what will not fit indoors, and doubles as the workshop, so the floor takes hot tires, dropped tools and spilled fluids in the same week. The same coating works on the rest of the house too, including ground floors and laundry rooms across Glendale.
A garage floor coating has a short list of jobs: give grip underfoot, seal the slab against oil and chemicals, stop the concrete dusting over everything at floor level, and be cleanable without special equipment.
Dialed In Epoxy Flooring works throughout Glendale and the West Valley, on houses built anywhere from the 1970s to last year. An older slab usually needs more preparation than a new one, which is why the grinding stage is not optional. Preparation is its own job, and we cover what an older slab needs separately.
A garage being brought back after years of use, a dealership floor that has to look right to customers, and a workshop bay that simply needs to be safe underfoot are the same build with a different finish on top.
Kevin is very knowledgeable, creative, and fun to work with. Extremely happy with his work!
A gray slab is the last unfinished surface in most Glendale homes, and it is the first thing you see when the door goes up.
Metallic epoxy builds a marble, granite or stone look out of pigment suspended in clear epoxy, at a fraction of what the material it imitates would cost to lay.
Because the pigment is moved by hand while the resin cures, every floor is one of a kind. Pick the colors to match the house or a brand, and the finished surface resists stains, chemicals and tire marking while wiping clean with a mop.
For a floor that will be worked on rather than admired, flake is usually the better answer.
Flake floors are built up in layers: an epoxy base coat, polymer chips broadcast across it, then two coats of polyaspartic. The chips give the surface a fine texture, which is what provides grip on a wet floor.
The same texture makes flake a sensible choice for commercial bays and workshops. It carries foot and light vehicle traffic, resists spilled chemicals, and never needs waxing or stripping the way vinyl does.
Maintenance is a mop. UV stable, moisture resistant topcoats mean the system also works outside on driveways, patios and pool decks, and the chip blend can be picked to sit with the rest of the property. How that is specified outdoors is covered on concrete coatings for part covered Glendale patios.
A 100% solids epoxy base cures to a hard, thick film. On the older slabs common around Glendale that matters more than it does on a new build, because the coating has to sit over a surface that has already seen thirty years of use.
It matters for the same reason on garage flooring in Tolleson, a few miles south.
Maintenance is a damp mop and a mild detergent, nothing special. A sealed floor does not shed dust, so the shelves and the second fridge stop collecting a gray film. The same build covers garage flooring in Avondale, on the same older West Valley slabs.
Polyaspartic topcoats hold their color under direct sun, so an open garage door through a West Valley summer does not fade the floor unevenly. Underneath, the base coat forms a moisture barrier so damp rising through the slab cannot push the finish off.
Bare concrete stains where it is spilled on and cracks where it moves. A coated slab has a sealed, flexible layer over the top, so spills sit on the surface and small slab movement does not telegraph straight through.
Every Glendale floor runs through the same sequence, start to finish, with our own crew on site: the slab is ground, profiled and vacuumed, a 100% solids epoxy base goes down, and two coats of UV stable polyaspartic finish it.
We start by mechanically grinding, profiling, and vacuuming the concrete garage floor to ensure the strongest adhesion possible.
No matter the damage, we repair every crack and hole in the garage floor.
We apply a base coat for flake flooring and 100% solids epoxy or primer coat for metallic epoxy.
For flake flooring, we broadcast the polymer flakes to provide even color and texture. For the metallic floor, we apply the metallic color coat. For 100% solids epoxy, we apply the second coat.
For flakes, we scrape off all excess bits to prepare the floor for the final step.
We finish with two coats of UV stable polyaspartic topcoat.
Most Glendale homeowners come to us deciding between two finishes and wanting to know how the floor behaves underfoot. These three answers cover the difference between flake and metallic, what happens when the floor gets wet, and how far the color range goes.
If you want to protect your concrete floor from damage, improve safety, and keep your space looking its best, give us a call or fill in our FREE quote form.
Phoenix, Peoria, Scottsdale, Mesa, Gilbert, Tempe, Glendale, Chandler, Queen Creek, Ahwatukee, San Tan Valley, Maricopa, Avondale, Paradise Valley, Tolleson, Wickenburg, Gold Canyon, Goodyear, New River, Prescott, Fountain Hills, Desert Ridge, Sedona, Surprise, Litchfield Park, Cave Creek, Apache Junction, Buckeye and the rest of Arizona.
