Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.
Gold Canyon garage floors, coated over concrete that has been mechanically ground and repaired, then finished with two UV stable polyaspartic coats.
Call (602) 820-7739Most garage floor failures start with a car that is still hot.
Hot tire pickup is the usual reason a coated garage floor goes wrong. A tire that has been on the road softens the coating under it, grips, and lifts it away in patches when the car moves. That is what people are describing when they say an epoxy floor peeled.
It happens to thin, poorly bonded coatings, which is mostly what store bought kits produce. It does not happen where the resin has been keyed into an opened slab and sealed under a topcoat built to take it. That is how a garage floor is keyed to the slab, and it is the build we run across Phoenix.
Dialed In Epoxy grinds the concrete, profiles it and vacuums it before anything is applied, repairs every crack and hole, and then builds the system up in layers so it cures as part of the slab rather than as a skin over it.
That applies whether the floor is going into a Gold Canyon home garage, a workshop, or a dealership service bay. The build does not change; the finish does. Outdoors the build is not the same, and concrete coatings for Gold Canyon patios and pool decks covers what changes.
Couldn't be happier with Kevin and his crew. Made my dream floor come true, thanks Dialed In.
Metallic is the finish for a garage that gets shown.
Pigment moves through a clear coat as it cures, which is what produces the depth. The finished floor can read as marble, granite, wood grain, flowing water or natural stone, depending on the colors and how they are worked.
Because that movement is never the same twice, no two floors match. The colors can be set to a brand palette or to an interior, so it turns up in showrooms and display garages far more than in working ones.
Flake is what goes into a garage that has to work.
It is built in layers: flakes broadcast into the wet base coat, scraped back, then two coats of UV stable polyaspartic sealing the lot. The layers above the concrete are what take the wear instead of the slab.
The flake bed leaves grip underfoot when the floor is wet, and the system resists chemicals and takes heavy foot or light vehicle traffic. It is the same build we put into commercial garages and engine performance workshops.
It wants a damp mop and mild detergent and nothing else, with no waxing or stripping. Moisture resistance and UV stability also let it run outdoors onto a driveway, patio or pool deck.
The finished system cures hard and thick, so daily traffic, vehicle weight and dropped tools do not wear it out of shape. Moisture, dust, dirt, grime, tire pick-ups and chemicals stay where they land.
Nothing soaks into a sealed floor, so cleaning is a damp mop and mild detergent. Doing it on a schedule is what keeps the surface looking as it did on day one.
The topcoats are 100% UV stable, which keeps direct sunlight from discoloring the floor. Below them the base coats form a waterproof barrier, and that is what stops the system lifting or peeling off the concrete.
Bare concrete is strong but porous, so it cracks and stains. A coating over it is stronger and more flexible, taking the damage and the staining that would otherwise end up in the slab.
Each Gold Canyon floor goes down in the same six steps, from grinding the concrete open to sealing the top. Nothing in the sequence is skipped on a smaller job.
We start by mechanically grinding, profiling, and vacuuming the concrete garage floor to ensure the strongest adhesion possible.
No matter the damage, we repair every crack and hole in the garage floor.
We apply a base coat for flake flooring and 100% solids epoxy or primer coat for metallic epoxy.
For flake flooring, we broadcast the polymer flakes to provide even color and texture. For the metallic floor, we apply the metallic color coat. For 100% solids epoxy, we apply the second coat.
For flakes, we scrape off all excess bits to prepare the floor for the final step.
We finish with two coats of UV stable polyaspartic topcoat.
Three questions cover most of what Gold Canyon homeowners ask us before booking a garage floor.
If you want to protect your concrete floor from damage, improve safety, and keep your space looking its best, give us a call or fill in our FREE quote form.
Phoenix, Peoria, Scottsdale, Mesa, Gilbert, Tempe, Glendale, Chandler, Queen Creek, Ahwatukee, San Tan Valley, Maricopa, Avondale, Paradise Valley, Tolleson, Wickenburg, Gold Canyon, Goodyear, New River, Prescott, Fountain Hills, Desert Ridge, Sedona, Surprise, Litchfield Park, Cave Creek, Apache Junction, Buckeye and the rest of Arizona.
