Garage Flooring Specialist in Phoenix

Epoxy Flooring in Peoria

An epoxy floor coating turns the concrete already under your feet into the finished surface. Dialed In Epoxy is based in Peoria, so this is the one service area where the crew is working from home ground: shorter runs, easier scheduling, and no travel loaded into the quote. Same build every time, 100% solids epoxy, the color layer, then two coats of UV stable polyaspartic. Licensed, bonded and insured under ROC 358358.

Call (602) 820-7739
Get a Free Quote!
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.

Whole-Home Floors, From Our Own Doorstep

Being based here changes what we can take on rather than what we charge for it. Larger whole-home jobs are the ones that benefit: a ground floor done as one continuous surface, room to room, with the crew able to come back the next morning without a long haul across the valley. That matters on a multi-room install, where the sequencing between grind, base, color and topcoat is what keeps the job to schedule.

It also means we can look at a floor quickly. Most Peoria quotes are a short drive, so a slab check does not have to wait for a run of jobs in the area to justify the trip. That check is the part that sets the system and the price, because moisture, an old coating or a cracked slab change what has to go down long before square footage does. Whatever the room, the layers are the same: here is how we build an epoxy floor coating.

Epoxy Garage Flooring Phoenix
Garage Flooring in Phoenix

What You Get Once the Floor Is Down

Across a whole ground floor the payoff is consistency: one surface, no thresholds between rooms, and no grout lines to keep on top of. Almost all of the day to day performance comes from the polyaspartic topcoat rather than the epoxy beneath it, which is the layer taking the wear, the sunlight and anything that gets spilled on it.

  • Wear resistance. Foot traffic, pet claws and dragged furniture meet the polyaspartic topcoat, not the color coat and not the concrete, so a scuff does not expose bare slab.
  • Stain and chemical resistance. The cured surface is non-porous, so oil, laundry detergent, paint and household cleaners sit on top of it instead of soaking into the concrete and staining it permanently.
  • UV stability. Polyaspartic holds its color under Arizona sun, which is why we use it as the topcoat rather than finishing with a second coat of epoxy on anything that sees daylight.
  • Simple cleaning. There are no grout lines, tile edges or seams for dust to collect in, so a dust mop and an occasional damp mop is the whole routine.
  • Color that is sealed in. Flake and metallic color sits under the topcoat rather than on the surface, so the finish does not wear off the high-traffic routes first.

How We Install an Epoxy Floor Coating

1. Slab check

We look at the slab before quoting: moisture, old coatings, cracks and how the room actually gets used. That is what sets the system and the price, not the square footage on its own.

2. Grind and profile

We mechanically grind, profile and vacuum the concrete with diamond tooling. No acid etch and no chemical stripper. This is the step that decides whether the coating stays down.

3. Repair

Cracks, pits and spalled edges are opened up, filled and ground flush, so the repair does not telegraph through the finished surface.

4. Base and color

The 100% solids epoxy base goes into the fresh profile, then the color layer: flake broadcast and scraped back, or the metallic coat poured and worked by hand.

5. Seal and protect

Two coats of UV stable polyaspartic seal the color in. A flake or metallic floor finished this way is a two day install. A polyaspartic only system can be done in a day.

Why Choose Dialed In Epoxy

  • Licensed, bonded and insured. ROC 358358. The registration number is on every page of this site, so you can check it with the Arizona Registrar of Contractors before anyone starts work.
  • Owner operated, with our own crews. Kevin Coleman founded Dialed In Epoxy and the business runs its own installation crews rather than subcontracting the work out.
  • One build, whatever the room. The preparation, the epoxy base and the two polyaspartic coats are the same in a laundry room as across a whole ground floor. What changes is the color layer you pick.
Garage Epoxy Flake Floor

Frequently Asked Questions

Does being based in Peoria change anything for me?
FAQ Dropdown Icon
Can you do a whole ground floor in one go?
FAQ Dropdown Icon
Is the whole house out of action while you work?
FAQ Dropdown Icon
How is a Peoria job priced?
FAQ Dropdown Icon
Who actually does the installation?
FAQ Dropdown Icon

Peoria Epoxy & Polished Concrete Services

Testimonials

What Our Customers Say.

Get a FREE Epoxy Floor Estimate

Your Details

Project Details

Thank you for contacting Dialed In Epoxy!
We have received your inquiry and
we will get back to you as soon as possible.
Oops! Something went wrong while submitting the form.

Do you want to upgrade your floor?

If you want to protect your concrete floor from damage, improve safety, and keep your space looking its best, give us a call or fill in our FREE quote form.

Dialed In Epoxy Flooring Location

Service Locations:

Phoenix, Peoria, Scottsdale, Mesa, Gilbert, Tempe, Glendale, Chandler, Queen Creek, Ahwatukee, San Tan Valley, Maricopa, Avondale, Paradise Valley, Tolleson, Wickenburg, Gold Canyon, Goodyear, New River, Prescott, Fountain Hills, Desert Ridge, Sedona, Surprise, Litchfield Park, Cave Creek, Apache Junction, Buckeye and the rest of Arizona.

Black Epoxy Garage FloorGray flake floor coating across a large empty steel-frame building with the roll-up door openConcrete Staining In Phoenix AzMetallic Epoxy Garage Flooring