Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.
You want to get from the door to the drive without thinking about your feet, and that is a levels question before it is a finish question. A coating is thin enough to keep every threshold flush, which is the main reason to choose one over laying something on top of the concrete you have. Dialed In Epoxy coats driveways, walkways and patios across Surprise with a polyaspartic base, a color layer and two UV stable coats. ROC 358358, and we are licensed, bonded and insured.
Call (602) 820-7739Anything laid over a slab raises it, and half an inch is enough to change where a door swings and how a step reads on the way in. A coating is measured in coats rather than in inches, so the levels you have are the levels you keep. That matters most at the three places you cross every day: the door to the patio, the step down to the path, and the join where the walkway meets the drive. All three stay as they were, only finished.
Footing is the other half of it, and you get to set that area by area. Anti-slip aggregate goes into the topcoat wherever it is specified, so the path from the drive can be given real grip while a patio you sit out on stays smooth and comfortable underfoot. Both still clean with a hose. It is worth walking the route with us and saying which parts you use in the dark or with your hands full, because those are the ones to specify first, and you will notice the difference on them every day. There is a fuller version of how edges and thresholds are finished on the main page.
Getting there evenly is a preparation job. Concrete poured at different times sits at slightly different heights and wears at different rates, so the diamond grind takes all of it to comparable material and any spalled or pitted areas are cut out and filled flush before the color goes on. Control joints stay open as joints, honored rather than covered over, so each slab keeps moving on its own without pulling at the finish above it, and the levels you sign off on are the levels you keep. Call (602) 820-7739 or fill in the quote form and we will walk the route with you and look at the levels.
Three stages on every exterior concrete coating in Surprise, AZ, and the levels are settled in the first.
We mechanically grind, profile and vacuum the concrete with diamond tooling, which takes off the weathered top layer along with any old sealer. Exterior slabs almost always carry one, and a coating laid over an existing sealer has nothing to bond to. That preparation runs under every interior floor we lay: the four layers of an epoxy floor build, in order.
Cracks, spalled edges and pitted areas are cut out, filled and ground flush. Control joints are honored rather than filled over, so the slab can still move where it was designed to move instead of cracking somewhere new.
Then the system itself: a polyaspartic base, the color layer, and two coats of UV stable polyaspartic over the top, with anti-slip aggregate broadcast in where it was specified. A polyaspartic build goes down in a day, which on a driveway is the difference between one afternoon without the car and a week of it.
If you want to protect your concrete floor from damage, improve safety, and keep your space looking its best, give us a call or fill in our FREE quote form.
Phoenix, Peoria, Scottsdale, Mesa, Gilbert, Tempe, Glendale, Chandler, Queen Creek, Ahwatukee, San Tan Valley, Maricopa, Avondale, Paradise Valley, Tolleson, Wickenburg, Gold Canyon, Goodyear, New River, Prescott, Fountain Hills, Desert Ridge, Sedona, Surprise, Litchfield Park, Cave Creek, Apache Junction, Buckeye and the rest of Arizona.
